End-Grain Oak Cutting Board · Medium
RICEKNIFE's end-grain oak cutting board is a 4.5 cm block of Scandinavian oak with its fibers standing vertically, so the knife edge goes down between them. RICEKNIFE's board is hand sanded to 1000 grit, finished with Jacob Bech's own wax and sits on anti-slip rubber feet. Three sizes from €94, with 100-day returns.
What makes an end-grain oak cutting board different?
The grain direction makes the difference. On RICEKNIFE's end-grain oak board the fibers stand upright, so the knife edge goes between them.
End-grain top
The top face of RICEKNIFE's board is end grain. Every oak fiber in that face stands upright.
Scandinavian oak body
Every size of RICEKNIFE's board is 4.5 cm thick. The length is what changes.
The metal plate
The RICEKNIFE DENMARK plate sits on the side of RICEKNIFE's end-grain oak board. The plate is metal.
Rubber feet
Anti-slip rubber feet sit under RICEKNIFE's board. Jacob Bech gives the feet four jobs.
- 01Help prevent warping
- 02Allow airflow underneath
- 03Reduce trapped moisture
- 04Prevent sliding
Sanded and waxed
RICEKNIFE's board is hand sanded to 1000 grit. Jacob Bech then finishes it with his own wax.
"This finish feeds the wood without fully sealing the grain…"Jacob Bech, Board Care card
Is an end-grain board gentler on knives than side-grain or plastic?
Yes, according to Jacob Bech. On RICEKNIFE's end-grain oak board the cut goes between the fibers, which is less harsh on the edge.
"End-grain means the wood fibers stand vertically. When cutting, the fibers separate slightly and close again. This is gentler on the knife edge and helps reduce deep cut marks over time."Jacob Bech · Board Care card
Jacob Bech makes RICEKNIFE Japanese-style knives and diamond sharpening stones. RICEKNIFE's end-grain oak board is where those edges land.
| End-grain oak | Side-grain | Plastic | |
|---|---|---|---|
| Fibers | Stand vertically; separate and close again | Harsher on the edge, says Jacob Bech | — |
| On the knife edge | Gentler on the knife edge | Harsher on the edge | Harsher on the edge |
| Over time | Can be sanded or resurfaced | — | "Plastic gets replaced." |
Which size end-grain oak cutting board fits my kitchen?
The one that matches your free counter length: 22.5, 45 or 65.5 cm. All three RICEKNIFE sizes are 32 cm deep.
| Size | L × D × H | Weight | Price | GTIN |
|---|---|---|---|---|
| Small | 22.5 × 32 × 4.5 cm | 2.4 kg | €94 | 5745001040451 |
| Medium | 45 × 32 × 4.5 cm | 4.6 kg | €187 | 5745001040468 |
| Large | 65.5 × 32 × 4.5 cm | 6.8 kg | €334 | 5745001040475 |
45 cm suits everyday dinners. The Medium weighs 4.6 kg.
How long does an oak cutting board last?
Jacob Bech's Board Care card answers it: "A good oak board is made to last for decades. This board can be sanded or resurfaced."
"Plastic gets replaced. Good wood gets better with time."Jacob Bech · Board Care card
What comes in the box with RICEKNIFE's end-grain oak board?
RICEKNIFE's end-grain oak board comes with Jacob Bech's beeswax and two care cards. Need more wax later? Contact RICEKNIFE on WhatsApp or at [email protected].
In the box
- The board
- RICEKNIFE's own organic beeswax, made by Jacob Bech himself: a blend of organic beeswax and mineral oil
- "Board Care" and "After First Use" cards
What do you do after the first use of an end-grain board?
After the first use, wash, dry, sand, wax and buff RICEKNIFE's end-grain oak board. Jacob Bech's After First Use card has four steps; here they are as six actions.
- WashWash the board with mild soap and water, never soaking.
- DryStand the board on its edge until fully dry.
- SandSand along the grain with 1000–1500 grit for about 30 seconds.
- WaxRub in Jacob Bech's organic beeswax blend.
- BuffBuff the waxed surface.
- Re-waxRe-wax whenever the surface looks dry.
What should I know before buying an end-grain cutting board?
Know the size, the care and the return terms. RICEKNIFE answers the common questions below.
Is an end-grain cutting board easier on knives?
Jacob Bech says it is. On RICEKNIFE's end-grain oak board the fibers stand vertically, so the cut goes down between them. Jacob Bech finds that less harsh than side-grain or plastic.
What size cutting board should I buy?
Measure your free counter length first. RICEKNIFE's Small is 22.5 cm long, the Medium 45 cm and the Large 65.5 cm. All three RICEKNIFE sizes are 32 cm deep and 4.5 cm thick.
Can an oak cutting board go in the dishwasher?
No. Jacob Bech's rules for RICEKNIFE's end-grain oak board are never the dishwasher and never leave it soaking. Wash the oak by hand with mild soap, dry it, and re-wax when it looks dry.
How often should I wax an end-grain board?
Re-wax RICEKNIFE's end-grain oak board whenever the oak looks dry. After the first use, Jacob Bech's card adds a sand along the grain at 1000–1500 grit for about 30 seconds.
Can the board be sanded if it gets cut marks?
Yes. Jacob Bech's Board Care card says RICEKNIFE's end-grain oak board can be sanded or resurfaced. His After First Use card sands along the grain with 1000–1500 grit for about 30 seconds.
Can I return the board if it does not suit my kitchen?
Yes. RICEKNIFE offers 100-day returns on the end-grain oak cutting board in every size. Unsure between two sizes? Message RICEKNIFE on WhatsApp at +45 20 46 46 90 before you order.
"Cook healthy meals for those you love."